/* ]]> */

 

Case Studies

 

Client:-Department of Defence – Navy

 

Project Title: -        SHIPS DIESEL GENERATION AND ELECTRICAL DISTRIBUTION SYSTEM SIMULATOR

Project Brief: -         The requirement of this project was to provide a power generation and distribution system in a training environment within existing Commonwealth facilities at HMAS Cerberus.  The Ships Diesel Generation and Electrical Distribution System Simulator (SDGEDSS) shall emulate an RAN ship installation and as such comply with DEF(AUST)5000-VOL 05 Pt 08 – Electrical System Requirements – Electrical Systems for RAN Combatant Ships and Submarines.   The SDGEDSS generated service power supply will be 450V, 60Hz, 3-phase, 3-wire un-earthed AC.

This was a design and construct project involving the electrical, mechanical and HMI design, fabrication, purchase and integration of specialised equipment to achieve a previously unaccomplished outcome.

 

To achieve this challenge MOLEC assembled a specialised team of recognised experts in their individual fields to complement our in-house capability which enabled us to provide our client with an outstanding outcome

 

Client:- Clarke Energy Australia

 

Project Title: -        Fitout of Multiple 3 MW Generator Enclosures using Coal Seam Gas Fuel 

 

Project Brief: -        The requirement of this project is the off-site fit out of multiple Generator & Control Room prefabricated enclosures to our customers specifications in order to facilitate seamless onsite installation, commissioning and completion of the project.

The works are carried out in a systematic manner, coordinating with other trades and a tight schedule in order to meet strict deadlines and a very high standard of workmanship.

 

Client: - Diamond Key International

 

Project Title: -        Vopak Bitumen Gantry off site fabrication and onsite installation in Sydney

 

Project Brief: -       The requirement of this project was to assist our customer design team with our extensive experience and knowledge base to develop a design that they had not previously accomplished.

When the design was completed our task was to complete the Off-Site in Melbourne and Onsite in Sydney installation works to the Double arm Bitumen Delivery Gantry.

 

This installation works consisted with mainly all Steel Wire Armour and Intrinsically Safe cables for use in Hazardous environments classified as Zone 1 and Zone 2

 

Client: - Goodman Fielder – Pampas

 

Project Title: -        Upgrade of Flour delivery System to comply with current standards

 

Project Brief: -        The requirement of this project was to inspect the existing installation and formulate a turnkey solution to upgrade the designated plant to comply with current legislation while the facility remained in full production and preserving the protocols required to operate in a food preparation environment.

This installation works consisted with mainly all Steel Wire Armour and Intrinsically Safe cables for use in Hazardous Dust environments classified as Zone21 and Zone22 and integrating 24Vdc equipment with an existing PLC which operated on a 240Vac system.

Works also included the installation of pneumatic actuators in the classified hazardous areas in lieu of non-compliant electrically operated actuators and valves.

Part of these works included developing a plan to facilitate working at heights over shared trafficable areas requiring the passage of delivery vehicles in order to keep the plant in full production.

 

Client: - Goodman Fielder – Victorian Bakery

 

Project Title: -        Upgrade of Flour delivery System to comply with current standards

 

Project Brief: -       The requirement of this project was to inspect the existing installation and formulate a turnkey solution to upgrade the designated plant to comply with current legislation while the facility remained in full production and preserving the protocols required to operate in a food preparation environment.

This installation works consisted with mainly all Steel Wire Armour and Intrinsically Safe cables for use in Hazardous Dust environments classified as Zone21 and Zone22 and integrating 24Vdc equipment with an existing PLC which operated on a 240Vac system.

Part of these works included developing a plan to facilitate working at heights over shared trafficable areas requiring the passage of delivery vehicles in order to keep the plant in full production.

 

Client: - Graincorp – Integro

 

Project Title: -        Project Delta Stage 1 - Western Warehouse Electrical distribution Boards

 

Project Brief: -        The requirement of this small project consisted of the supply and installation of two new distribution boards, the installation of sub-mains cabling and the transfer of circuits from existing distribution boards in the Western Warehouse area at West Footscray, to allow demolition works associated with the Project Delta Enabling Works.

All of the works were required to be carried out while the plant remained in operation with a daily consultation with production staff to minimise the impact on production.

 

 

Client: - Graincorp – Integro

 

Project Title: -        Project Delta Stage 1 - Western Warehouse Electrical distribution Boards

 

Project Brief: -       The requirement of this small project consisted of a range of valves and instruments that were be installed on and around a particular process. A new control cabinet was installed by others. The scope of works involved connecting the field instruments back to the control cabinet which involved both electrical and pneumatic works.

All of the works were required to be carried out while the plant remained in operation.

 

 

General Information applicable to all of our projects

All of our projects are carried out with all of the following Procedures in place

  • MOLEC Electrical Contractors Pty Ltd. OCCUPATIONAL HEALTH & SAFETY MANAGEMENT PLAN

     

  • MOLEC Electrical Contractors Pty Ltd. QUALITY MANAGEMENT PLAN to ISO 9001:2008 Accreditation pending

     

  • MOLEC Electrical Contractors Pty Ltd. ENVIRONMENTAL MANAGEMENT PLAN

     

  • Compliance with all Site Induction systems

     

  • Compliance with all site permit systems

     

  • Compliance with all State and Commonwealth of Australia Authorities, Acts and Standards.

     

  • Project Scope of Works